Huawei CFP-100G-ER4 High Speed Transceiver, CFP, 100G, Single-mode Module (1310nm band, 4*25G, 40km, stright LC)

02310YTE - Genuine Huawei CFP-100G-ER4 High Speed Transceiver, CFP, 100G, Single-mode Module (1310nm band, 4*25G, 40km, stright LC)

Basic Information

• Module name: CFP-100G-ER4
• Part Number: 02310YTE
• Model: CFP-100G-ER4
• Form factor: CFP
• Application standard: 100GBASE-ER4
• Connector type: LC
• Optical fiber type: SMF
• Working case temperature [°C(°F)]: 0°C to 70°C (32°F to 158°F)
• Transmission rate [bit/s]: 100 Gbit/s
• Target transmission distance [km]: Single-mode fiber: 40 km

Transmitter Optical Characteristics

• Center wavelength [nm]: 1295 nm, 1300 nm, 1304 nm, 1309 nm
• Maximum Tx optical power [dBm]: 2.9 dBm
• Minimum Tx optical power [dBm]: -2.9 dBm
• Minimum extinction ratio [dB]: 8 dB

Receiver Optical Characteristics

• Rx sensitivity [dBm]: -21.4 dBm
• Overload power [dBm]: 4.5 dBm

NOTE:

CFP-100G-ER4 optical modules are used in the following scenarios:

• When the transmission distance is less than 10 km, the optical power on the receive end is higher than 1 dBm. In this case, use a 10 dB optical attenuator to reduce the receive optical power.
• When the transmission distance is longer than or equal to 10 km and less than 25 km, the optical power on the receive end is higher than -4 dBm and lower than or equal to 1 dBm. In this case, use a 5 dB optical attenuator to reduce the receive optical power.
• When the transmission distance is in the range of 25 km and 40 km, the optical power on the receive end is lower than or equal to -4 dBm. In this case, no optical attenuator is required.

02310YTE

This 02310YTE is 100% genuine Huawei product. It won't have any compatibility problem with your Huawei devices. And the Huawei CFP-100G-ER4 High Speed Transceiver, CFP, 100G, Single-mode Module (1310nm band, 4*25G, 40km, stright LC) is factory new with original packaging. Buy it now and enjoy risk free purchase with fast worldwide delivery from GenuineModules.com